Rapid Refresh model data are combined with the radar products to provide information about the possible QPE uncertainties.
Bright band [bottom] from the RAP derived height
2-D analysis of bright band top heights derived from single radar vertical profiles of reflectivity.
2-D analysis of bright band bottom heights derived from single radar vertical profiles of reflectivity.
Hybrid scan blockage; indicates percentage of the radar beam that is blocked.
This indicates the percentage of time that was covered by radar.
Percentage of time that a grid point was covered by a radar for the following time increments: 1hr, 3hr, 6hr, 12hr, 24hr, 48hr, 72hr